prepare for Laon Historique 2021, Springs

 

In preparation for the Laon Historique I changed the front spring to gain some height at the front. The "new" springs had gone soft and I was almost running on the bump stops.

I fitted the "long" springs but without the rubber donut and the ride height is just right. and I can add the donut if they go soft.

The Laon classic was well organised.

On the saturday we were given a route to follow so the co-pilots had some work to do.

On the sunday the towns roads are closed and the  cars "parade" around the streets. 

Its not a race - but one keeps up with the guy in front!

starring at time 2:26min

https://youtu.be/RQDYH3Gd8R4

On the way home (in the UK)  the proshaft lost a circlip so we had to stop when the car suddenly started to shake.

Both UJ's seemed a bit damaged - maybe due to lack of greaseing - or too much torque.

Ordered GKN U040 no grease nipple replacements.

The GKN U040 have larger rollers but seem otherwise to be the same.

Fitting is fairly easy. 

Although I had trouble with two circlips at the yoke end.

its a bit tight.

If using a version with grease nipple then the nipple needs to fit in the correct orientation on the propshaft which has an indentation for it.

Shown here.

nn