Maybe a very slow conversion of a series 3 1725cc Alpine Automatic to a 2800cc Ford cologne V6 engine from a Ford Capri 2.8i ( 88-99-PF )
Lovely sunbeam
Wednesday, 29 July 2020
Tuesday, 28 July 2020
steering relay bearing replacement
The steering relay is worn and the heat from the engine probably melts the grease a bit. So it needs new bushes.
Steering relay is a tight fit beside the exhaust manifold.
So to remove the relay with engine in situ the relay needed to be dismantled.
Getting the taper remover tool was also a challenge for the swivel ends.
The bushes needed to be reamed for 7/8" - I used a 21-23mm adjustable and worked my way up.
The grease nipple isn't accessible at all as the exhaust manifold is in the way.
So a new nipple location has been added.
While removed the lower reinforcing web was trimmed further to clear the exhaust.
Subscribe to:
Posts (Atom)